Print Details

 

 

Watch the video.

 

To print the details created with Land F/X, or to just print all the details come with it, you can use the Print Details function. You need to have a blank drawing open, and after clicking Print Details, the Page Setup dialog box will appear. You will need to select an appropriate printer, CTB file, and specify an 8½ x 11 Portrait layout – if you do not have such a layout selected when you click Ok, you will be notified that you need to do so.

Once you have selected your Portrait Letter layout settings, the Print Details dialog box will appear:

 

Print Details dialog box.

 

You have four options to select which details to print:

§	All by Date: This option will print both Standard and Component details, saved on or after the date specified; the next time you Print Details, this date will default to the last date you printed all details.

§	Standard by Division: This will print only Standard details, within the selected division. Note that the list of divisions only displays the divisions that have details within them.

§	Component by Category: This will let you select any single Component detail Category, to print all details within it.

§	All Details: This will print the entire detail library, both Standard and Component, and reset the Details Last Printed date to today’s date.