I used the circuiting tool to set up zones. I later added valves and numbered them to match the zones they were connected to. Through the irrigation design process, I ended up adding additional zones, which got numbered in the order of when I added them. I would like to renumber the zones to make sense from the perspective of someone looking at our drawings- ie, the first zone is on the top left and the last zone is the bottom right.
It is easy to renumber valves-- how do I renumber the zones?
It is easy to renumber valves-- how do I renumber the zones?
Once you have the valves placed, piped, and numbered, there is really no reason for the zones anymore.
You can use the Colorize Zones option in the Valve Schedule to accomplish any desired output.
It would also be much more than just renumbering -- new zones might need to be created to match your newly placed valves, and boundaries might need to be adjusted.
Unless I'm missing something?
--J
You can use the Colorize Zones option in the Valve Schedule to accomplish any desired output.
It would also be much more than just renumbering -- new zones might need to be created to match your newly placed valves, and boundaries might need to be adjusted.
Unless I'm missing something?
--J
Dear Khatherine,
I agree with Jeremiah that you dont really need the zones once you placed the valves and pipes..
But in case you still need to usee them and If the project is small and you only have few zones you can easily change the number of each zone by clicking on the number block which apperaed when you creat the zone and change it..
and automatically the number will be changed in the circuit window..
or you can change the zone number firstly from the circuit window and it will be changed automatically in the plan..
Hope this help..
Nibal
I agree with Jeremiah that you dont really need the zones once you placed the valves and pipes..
But in case you still need to usee them and If the project is small and you only have few zones you can easily change the number of each zone by clicking on the number block which apperaed when you creat the zone and change it..
and automatically the number will be changed in the circuit window..
or you can change the zone number firstly from the circuit window and it will be changed automatically in the plan..
Hope this help..
Nibal
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.