This has been corrected, and is part of the 16.90 update posting tomorrow.
--J
Naturalist,
Apologies on the delayed response, it looks like there was an issue with the notifications getting to us. Please make sure you are up to date with the latest Land F/X version and run Verify Laterals, then try sizing your laterals again. If this doesn't seem to fix your issue please submit a technical support ticket and we will be happy to check out what might be going on.
It seems that when I add lateral pipes, things do change, but the needed flow at the connection point No.3 still multiplies into astronomic figures (over 800l/min instead of below 120l/min).
I am attaching this file so you can check what is wrong. I was working at connection point No.3 (work area "CJELINA 3 ")
Hi, I have a similar problem.
I have placed several valves into big schematic drip areas. The problem is that those valves are not splitting flows as they should do automatically - they are multiplying the same flow, so instead of having 4 zones with flow 80l/min (total 320 l/min), I end up with 4 zones with 320l/min flow. Moreover, this is making the mainline sizing impossible as I do not have a water source supporting this flow.
Thank you
Nemanja
I just ran a test drawing with your instructions and everything seemed to work just fine. Go ahead and send in your files using the Tech Support tool and we can take a look at what is going on with your file.
https://www.landfx.com/kb/item/125-how-to-submit-a-support-ticket.html
- Page :
- 1
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.