Secret Keyboard Commands

• The Commands
• Formerly Secret Commands Now Available Within Land F/X Ribbons

While most of our tools are now available on our ribbons, we've kept some of them as keyboard-only commands. These "secret tools" carry out a variety of helpful automated processes – from repairing problematic callouts to configuring all the layers in your drawing.

 

The Commands

 

FX_DEVELOPMENTSCHEDULE

Run the legacy version of the Site Development (Concept Graphics) schedule. We updated this feature to the current vertical format back in 2018 for various improvement reasons, including the ability to allow photos in the schedule. Use this command if you need to match the old format while editing an old drawing.

 

FX_OLDSPOTELEVATION

Use our old Spot Elevation tool for cases where you need to match the old style. Going forward, however, we highly recommend using our newer Spot Elevation tool from the ribbon.

 

LANDFXANNO

Turn on and off the ability to place Land F/X scaled objects as annotative objects instead. This tool is typically used to turn it OFF. See our documentation on annotative scaling.

 

LANDFXBACKGROUND

Change the background color of the thumbnail preview slides in our dialog boxes displaying blocks or hatches to select. More information

 

LANDFXCLASSIC, LANDFXRIBBON

Toggles between Classic Mode (LANDFXCLASSIC) and the Land F/X and ACAD ribbons (LANDFXRIBBON).

 

LANDFXDIALOGRESET

This command resets the locations of all Land F/X dialog boxes. It can come in handy if you work in different monitors, if you are unable to locate a dialog box, or if one of our tools seems to freeze – for example, if you try to size the mainline in an irrigation design and your drawing seems to freeze. All open Land F/X dialog boxes will be located and returned to the front of your view on the monitor where you're using AutoCAD.

 

Useri1 = 12345 (Legacy Detail Callouts)

Typing the Useri1 command and then entering a value of 12345 reverts your draing to the legacy detail callout blocks – the non dynamic block callouts, whose leader and text separate entities do not move together dynamically. Our updated dynamic block detail callouts, released in August 2025, are a vast improvement over these legacy callouts, making it easier to move around already placed callouts instead of needing to delete and replace them. However, in the event of an issue with using these updated detail callouts in a drawing, you can use this drawing-specific setting to revert back to the old callouts quickly and get the work done. Note that this setting is intended to be temporary just to cover for the initial roll-out of this new block. If you encounter issues, you'll also need to open a support ticket and report the details of that issue with an example drawing, which will allow our team to diagnose and fix the issue, allowing you to continue using this new callout rather than relying on this legacy setting, which will be discontinued sometime in the future.

Formerly Secret Commands Now Available Within Land F/X Ribbons

Below are some commands that used to be "secret" but that we've since built into the Land F/X ribbons:

 

CONVERTALLTEXT (F/X Details ribbon)

Converts all text in the drawing to multi-line text (MText).

• More information on Convert All Text
• Also available as an F/X CAD ribbon button.

 

DELETEFONT (F/X Site ribbon)

If you are no longer using one of your ;Text Styles, use this command to delete it from the list.

• More information on Delete Font
• Also available as an F/X CAD ribbon button.

 

DELETEHATCH (F/X Site ribbon)

Deletes a hatch that was placed incorrectly or is no longer needed.

• More information on Delete Hatch
• Also available as an F/X CAD ribbon button.

 

DELREGAPPS (F/X Admin ribbon)

Deletes all Registered Applications (RegApps) from your drawing – an important component of the drawing cleanup process.

• More information on DelRegApps
• Also available as an F/X CAD ribbon button.

 

FX_DETAILVIEWPORT (F/X Details ribbon)

Create a drawing-specific project detail that uses a viewport to see a detailed area in Model Space. This tool is great for enlargements of your plan, or elevations you'd like to keep within the working drawing.

More information on Detail Viewport

 

FX_RECALCZONES (F/X Irrigation ribbon)

Fires the Recalculate Zones command without the need to open the Circuiting tool. Allows for quicker recalculation to circuit zones when making modifications.

More information on FX_RECALCZONES

 

FXPLODE (F/X Admin ribbon)

Convert a Concept Line back to a polyline to edit its layout before turning back into a Concept Line.

More information on FXPLODE

 

GOBYLAYER (F/X Admin ribbon)

Converts all objects to the Color ByLayer setting – including blocks, or blocks within blocks). Color ByLayer is our recommended layer setting for CAD drawings.

• More information on Go ByLayer
• Also available as an F/X CAD ribbon button.

 

IMPORTCSV (F/X Admin ribbon)

If you have a CSV file of coordinates, this command will place a block such as a tree or Northing-Easting Point at each location.

• More information on the IMPORTCSV command

 

LANDFX (all ribbons)

Opens the Land F/X Trainer.

 

Set Mask Size FX_MASKSIZE (F/X Admin ribbon)

Set all multileader (MLeader) background mask offset factors. More information

 

FX_LAYERCOLOR (F/X Admin ribbon)

Select an object and change the color of its assigned layer in the Layer Properties Manager of the active drawing. Works on linework inside blocks and Xrefs.

More information on FX_LAYERCOLOR

 

NEWFLOWZONE (F/X Irrigation ribbon)

Fires the New Flow Zones command. Allows you to assign a shortcut key to use the tool rather than having to size the mainline to access the tool.

 

POLYDIVIDE (F/X Admin ribbon)

Divide a closed polyline into separate closed sections.

More information about POLYDIVIDE

 

PolySimplify (now known as PolyOptimize)

Instantly simplify a complex polyline by reducing how many vertices it includes. More information

 

PRG (Instant Purge) (F/X Admin ribbon)

Automates the three-step native AutoCAD PURGE command, which purges objects from your drawing.

• More information on PRG
• Also available as an F/X CAD ribbon button.

 

REDEFINEBLOCK (F/X Admin ribbon)

Use this command to repair callout blocks that are behaving strangely. Note: This command will only work on files within the folder LandFX/Blocks/Graphics/Callouts.

 

REMOVEXDAT (F/X Admin ribbon)

Removes data associated with a "smart" object, turning it into a generic object (for example, turns a groundcover or Reference Note hatch into a generic hatch with no data).

More information about REMOVEXDAT

 

REAL (Reload All Linetypes) (F/X Admin ribbon)

This command reloads all linetypes to correct scaling issues.

• More information on REAL
• Also available as an F/X CAD ribbon button.

 

REAT (F/X Site ribbon)

Update all Land F/X Text Styles in the current drawing to match the active Preference Set.

• More information on the REAT command
• Also available as an F/X CAD ribbon button.

 

Spot Elevation Z Align (FX_SPOTELEVATIONZALIGN) (F/X Site ribbon)

Assign a Z Elevation to a Spot Elevation callout to coordinate with Civil 3D, a surveyor, or with a 3D modeling program such as SketchUp, Rhino, or Revit. More information

 

SuperLayFreeze (FX_LAYFRZ) (F/X Admin ribbon)

Allows you to freeze object layers in Xrefs as well as in the drawing. This command replaces the native AutoCAD LAYFRZ command, which has issues toggling between objects in the main drawing and objects in Xrefs. More information

 

SuperLayIso (FX_LAYISOLATE) (F/X Admin ribbon)

This command replaces the native AutoCAD LAYISO command, which is effective for isolating layers but has issues isolating Land F/X blocks. FX_LAYISOLATE allows you to isolate Land F/X blocks. More information

 

 

TEXT2ATTRIB (Text to Attribute) (F/X Site ribbon)

Converts text within a callout block to an attribute – a piece of dynamic text that allows "smart" blocks, such as plant labels and irrigation callouts, to take on different values when inserted into a drawing.

• More information on TEXT2ATTRIB
• Also available as an F/X CAD ribbon button.