Manufacturer and Content Updates

Flomec has introduced new large-pipe sizes for the QS200 insertion flowmeter. Designed for above- and below-grade applications, the new saddle version comes in four sizes to fit 6", 8", 10", or 12" diameter pipe. Capable of leak detection down to 0.1 fps and designed for clean water flow management, the flow sensor features a simple two-wire connector to ensure compatibility with common irrigation controllers.

You can find the Flomec QS200 flowmeter in our Irrigation Manager under Auxiliary Equipment > Flow Sensor.

Creative Sensor Technology (CST) introduces the next version of the ELF (Enhanced Low Flow) meter, with a three-wire scaled pulse (SP3) output that can connect to all Hunter Hydrawise controller models.

The ELF is designed to measures rates of flow in small-diameter closed pipe within residential or commercial irrigation systems. The new SP3 version has three wires and produces a pulse output scaled one pulse equals one gallon.

When specifying these products, you can choose between the following new models:

• • ELF-T75-SP3
• • ELF-T10-SP3
• • ELF-T10-BSP3

You can find this line in our Irrigation Manager under Auxiliary Equipment > Flow Sensor.

DIG Corporation has made our month by rejoining us as an irrigation manufacturer partner.

Since its foundation in 1981, DIG has expanded into a distributor of battery-operated irrigation controllers and a manufacturer of low-volume irrigation products, including drip tubing, dripline, fittings, and accessories. A significant portion of the company's catalog is devoted to the LEIT Controllers product line, which employs a proprietary technology that relies solely on ambient light for power.

You can find DIG products in the Drip, Valves, and Auxiliary Equipment sections of our Irrigation Manager.

We've recently added Rain Master’s TWICE 2-wire decoders, which ensure system integrity between the TWICE module and irrigation valves.

Each decoder has a unique address that's programmable at the interface module, which will shut off automatically in the event of a communication loss. An open circuit or short will turn off any valve within a 100-foot operating radius from the decoder(s).

When specifying these decoders, you can choose between the TW-D-1, -2, or -4 for the corresponding number of controllable valves. You can find them in our Irrigation Manager under Auxiliary Equipment > Controller Accessories.

Netafim has recently expanded its dripline product offerings with significant upgrades to the standard HCVXR dripline. The newly named HCVXR-CS incorporates Cupron® copper oxide-based technology, infused directly into both the emitter and stripe of the dripline for improved performance and three-level protection from root intrusion.

Look for Netafim's HCVXR-CS dripline in the Drip > Dripline section of our Irrigation Manager.

We’re thrilled to announce that Precision Pumping Systems (PPS) has joined our family of irrigation manufacturer partners. PPS designs and manufacturers packaged pumping systems to projects' exact requirements, ranging from 30 GPM booster stations to 15,000 GPM pump systems and control panels from ½ hp up to 700 hp. A second-generation family-owned and operated company, PPS has provided custom pump systems for almost half a century.

Look for PPS products under "Booster Pumps" in the Auxiliary Equipment section of our Irrigation Manager.

Hunter Industries continually evaluates irrigation professionals' needs as a prime factor in the company's endeavor to develop innovative, high-quality products – including the improvement of its existing product line. To that end, Hunter has recently introduced 11 high-performance nozzles for its best-selling I-25 rotor. Each of these new nozzles features a rounded face and an refined geometric design for easier insertion into the sprinkler. They have the same flow and radius specifications as the original nozzles and are retrofit compatible with all I-25 models. As a result of these improvements, Hunter has eliminated the #5 nozzle from its product offering.

For more information, visit hunterindustries.com.

You can browse Hunter's entire catalog from our Irrigation Manager.

Rain Bird has recently released the 702 and 752 series valve-in-head rotors for golf applications, and we’ve added them to our equipment library for you to specify. These rotors replace the 700/751 series and are designed to offer faster, easier adjustments with fewer parts with the intention to minimize maintenance and simplify inventory.

The full-circle 702 series lists standard electric or integrated control models, each with standard and wind-tolerant nozzle options. The 752 series lists the same electric or integrated models, but with standard and low-angle nozzle options.

You can find the 702 and 752 Series Rotors in the Heads > Valve-In-Head Rotors section of our Irrigation Manager.

Since becoming partners with us last year, Hot Box has provided Irrigation F/X users with a wide variety of enclosures for almost any irrigation project.

The most recent additions to the company's catalog are the Aluminum Dropover and Aluminum Modular series, each with heated or unheated options to handle freezing conditions.

Hot Box's durable, industrial-style enclosures are manufactured from corrosion- and UV resistant-aluminum. Because they are customizable, these enclosures are suitable for larger projects.

You can find these new enclosure models, and browse the rest of Hot Box's catalog, through our Irrigation Manager > Auxiliary Equipment > Enclosures.

Rain Bird's newest line of 2-wire irrigation controllers is now available in our irrigation equipment database. Designed for large spaces such as housing complexes, sports fields, and parks, the ESP-LXIVM 2-wire controller comes in different configurations that include both 60- and 240-station models.

You can find the ESP-LXIVM 2-wire controller and accessories in the Auxiliary Equipment section of our Irrigation Manager.

Hunter Industries has expanded its Controller and Central Control product lines, adding the NODE-BT, Bluetooth Tap Timer and Centralus Central Control products.

The NODE-BT controller is a 1-, 2-, or 4-station bluetooth battery-operated controller for residential and commercial applications. The battery-operated Bluetooth Tap Timer is designed for smaller areas, offering 1- or 2-station capacity and controlled via smartphone.

Hunter has also expanded its cloud-based irrigation management platform, Centralus, by adding Wi-Fi and Ethernet modules (A2C) for their ACC2 controllers.

You can browse Hunter's entire catalog from our Irrigation Manager.

We've added a stack of new items to Weathermatic's catalog in the Land F/X database this past month, including turf rotors, controllers, quick coupler valves, and smart control drip zone kits.

The 6000 Series feature a 4- or 12-inch pop-up, while the 6500 Series Rotors are 4-inch pop-ups only. Both series come in check valve and purple cap options for non-potable applications.

SoloRain Battery-operated controllers fit all Weathermatic valves and are designed for smaller-scale applications from 1 to 4 zones. The 8014ESR is available with valve adapter kits for other manufacturers.

Signature 1-inch quick coupler valves are available in NPT or BSP connection types, and the purple cap can be specified for any non-potable applications.

Finally, Weathermatic's Smart Control Zone kits incorporate pre-assembled valves, filters, and pressure regulators with ultra-low flow capability. They’re applicable to residential and commercial applications.

You can browse Weathermatic's entire catalog from our Irrigation Manager.

Another recent addition to Buckner Superior's catalog is the A123 shrub impact rotor, now available in our equipment database. The A123's brass and stainless-steel construction, with single-nozzle or dual over-under nozzle model options, makes it a durable and corrosion-resistant option for applications such as large landscape or turf irrigation, waste-water treatment, and dust control.

You can find A123 models in the Heads > Shrub Impact section of our Irrigation Manager.

Hunter Industries' new X2 controller and I-50 turf rotor are now available in our irrigation database.

The X2, an economical controller choice for residential or commercial irrigation, includes optional Wi-Fi connectivity to Hunter's Hydrawise technology. It can run 4, 6, 8 or 14 stations in your design, each with the same Wi-Fi capability.

The I-50 turf rotor's non-stripping planetary drive gear makes it ideal for projects with challenging water quality conditions and large turf areas. Available options for this rotor include standard single nozzle, dual-opposing nozzles, purple cover for reclaimed water, and a turf cup kit.

You can browse Hunter Industries' entire catalog from our Irrigation Manager.

We've recently added the RPS75i to K-Rain's already substantial collection of shrub rotors in our irrigation database. Incorporating a simple flow control, this rotor is designed for even water distribution, elimination of dry spots, and improved zone performance.

When specifying this product, you can choose between standard-angle and low-angle nozzles available in either plastic or stainless steel, with a further check valve option.

We’re delighted to add Leemco products to our ever-growing installation detail library. Leemco offers a wide range of products for golf, commercial, and municipal piping systems with a focus on durability, corrosion resistance, and ease of installation. You can now find installation details for a number of Leemco’s valves, fittings, joint restraints, adapters, and saddles in our Detail Explorer under F/X Detail Library > Irrigation > Leemco.

We've recently added Buckner Superior's new SPV Series remote control valve to the company's existing range of irrigation products in the Land F/X database. The SPV, a premium glass-filled nylon valve featuring a scrubbing rod and filter system, provides protection for both dirty- and recycled-water applications. Standard models are available, along with options for a pressure-regulating module add-on and a reclaimed water option with a purple handle. All variations are available in 1-, 1-1/2-, and 2-inch sizes.

You can find and place the SPV models through the Valves > Remote Control Valves section of our Irrigation Manager.

We're thrilled to announce that after some time working with our team behind the scenes, Amiad Filtration Systems has joined our family of irrigation manufacturer partners. For more than half a century, Amiad has provided filtration solutions aimed at solving irrigation water challenges year-round and worldwide. Amiad's product line of automatic, semi-automatic, and manual filter series, featuring steel or plastic bodies of all sizes, ranges in application from agriculture and horticulture to greenhouse and landscape.

Look for Amiad products in the Auxiliary Equipment section of our Irrigation Manager.

We’ve expanded our list of irrigation manufacturers to include Hot Box – manufacturer of the irrigation equipment enclosures of the same name. Designed for safe installation, Hot Box enclosures allow for easy maintenance of irrigation equipment in the most economical, safe, and accessible location: outside and above ground. Choose from construction materials ranging from aluminum to fiberglass, plastic, imitation rock textures, and more. Access options include drop-over, flip-top, single-panel, and dual-panel.

You can find Hot Box enclosures in the Auxiliary Equipment > Enclosures section of our Irrigation Manager.

We’re thrilled to welcome Flomec to our ever-growing list of irrigation manufacturer partners. Flomec designs, engineers, and manufactures a variety of flowmeters and other products serving commercial and retail applications ranging from agriculture to engineering and HVAC across the globe.

Look for Flomec products such as the QS200 Ultrasonic flowmeter among our collection of irrigation equipment. The QS200 is available in five pipe sizes ranging from one to four inches. The QS200 has no moving parts, which helps keep installation easy and maintenance at a minimum.

You can find it in our Irrigation Manager under Auxiliary Equipment > Flow Sensors. In the near future, look for more Flomec products in the Water Meters section of the Irrigation Manager as well.

We've just added K-Rain’s 6000 Series valves to our equipment database. This manual control (distribution) valve has 4- (6400) or 6-outlet (6600) model options that can change between watering two to four, and five to six zones respectively. A reclaimed-water option is also available for each model, denoted by a purple top. This series can be used on in-line or pump fed applications, with a minimum flow requirement of 15 GPM and a pressure operating range of 25 – 150 PSI.

Find K-Rain’s 6000 Series valves in the Manual Control Valve section of our Irrigation Manager.

Buckner Superior’s new PRS-MOD pressure-regulating module is an ideal addition to retrofits and new installations alike. Easily installed via threading into the solenoid port, the PRS-MOD adds flexibility to your specification of Superior Brand base valves by regulating outlet pressure at the valve. Compatible with Superior 950, 950DW, 950DWIB, 950SD, 1000, and 800 valves, it will regulate and maintain outlet pressure between 10 and 100 PSI in dial adjustments of 5 PSI within systems with up to 200 PSI of incoming pressure.

Note that the existing 950PRS, with its factory-installed, side-mounted pressure regulator, will retain its place within the Buckner Superior product line. The PRS-MOD is designed to add regulation to valves already installed in the field, or for installation with base Superior valves for regulation without the need for external tubing. We’ve added PRS-MOD options to each compatible Superior valve series listed above. You can find them in the Valves > Remote Control Valves section of our Irrigation Manager.

We're happy to announce the addition of Landscape Products Inc. to the Land F/X Irrigation family. Landscape Products started manufacturing plastic pavers in 1978, but has since expanded to drip/micro irrigation, valves, and landscape accessories. We've recently added details for Landscape Products' drip equipment, dripline, and valves, which can be found in our F/X Detail Library under Irrigation/Landscape Products Inc.

In addition, you can now add Landscape Products' EZ-ID CV dripline to your projects from the Irrigation Manager, under the Drip category.

Do you need a simple on/off accessory to control the flow in your low-pressure irrigation design? Now you can use Netafim's 1/2" Manual Flush Valve with barbed insert, which fits Techline HCVXR, HCVXR-RW/RWP, CV, DL, RW, and RWP driplines, as well as PE irrigation hose.

You can find this product in our irrigation equipment database through the Irrigation Manager, under Drip > Drip Accessories > Netafim.

Are you already a fan of Hunter's MP Rotator 800 Series? The previously released 800 series covered distances as short as 6 ft (1.8 m), while the new 815 Series covers a range of 6 – 16 ft (1.8 – 4.9m). This nozzle is for high-efficiency, short-radius applications and maintains all the benefits of the patented MP Rotator design. To start specifying the MP 815 series, select the Heads option in our Irrigation Manager. You can find them in both the Shrub and Turf Rotary sections.

Hunter has discontinued the PLD dripline and replaced it with the new Hunter Dripline (HDL). This highly kink-resistant product includes flow indicator stripes and comes neatly packaged in a stretch-wrapped coil. Manufactured with 80% reprocessed pre-consumer resin, HDL is as sustainable as it robust. Look for it in our Irrigation Manager in both the Dripline and Area for Dripline sections.

Have you been using GPH’s SpecFlow emitters in your plans, but need a higher flow rate? We’ve expanded the range of the GPST emitter – designed to perform in harsh environments – to include 4-, 6-, 8 and 10-gallon-per-hour emitters. The GPST’s unique screen prevents debris from blocking the emitter, while a larger inlet size allows for a continuous and consistent flow rate. Expanded flow rates and a high-velocity self-cleaning mechanism make these emitters an excellent addition to your drip irrigation systems.

The new Baseline SubStation is the perfect solution for complex irrigation sites. The SubStation connects wirelessly to BaseStation 3200 controller, allowing you to consolidate multiple existing controllers into a single BaseStation 3200 controller without the need to run wire across long distances. Once you've established the connection, you can program the SubStation from a BaseStation 3200 or with BaseManager from any location. With the SubStation, you can bring the latest in smart irrigation technology to any conventional wire or two-wire site.

Ready to spec the SubStation? Find it in the Controller Accessories section of our Irrigation Manager.

Looking to try out a new controller? We've added the Hunter ACC2 to our irrigation equipment library. Sporting a reversible facepack, the ACC2 controller can manage up to 54 stations, multiple water sources, along with normally open and normally closed master valves. It's available in several wall mount and pedestal configurations. The ACC2 can be configured with up to 10 start times for each of its 32 independent programs, and can run up to 14 of those programs simultaneously. Additionally, up to 3 CLIK sensors may be added to the ACC2 controller. It can manage up to 6 different flow zones and 3 pump or master valve outputs.

We've added new HydroPoint products and details to our libraries! Check out the WeatherTRAK OptiFlow XR controllers, both as selectable equipment and corresponding details. WeatherTRAK OptiFlow XR delivers advanced flow management for an entire site via a simple interface. By enabling controllers to share information over the cloud without the complications created by wires and local radios, OptiFlow XR optimizes how, when, and where watering takes place within your water windows.

Find these new products through our Irrigation Manager, and new details in our detail library.

Be sure to check out our new Manufacturer Connection page.

We're happy to welcome Maxijet as an irrigation manufacturer partner, with products now available within our irrigation equipment library. Made in the USA, Maxijet's low-volume drip equipment is available for both turf and agricultural use. When adding drip emitters, look through Maxijet's available equipment and give them a try! From micro sprinkler spinners to vertical hang assemblies, Maxijet has something for every drip system.

Keep your eyes on the news – and our Irrigation Manager – over the next few weeks. We're starting our review of Toro's and Irritrol's entire catalogs. You'll see updates to existing products, as well as some new ones making their way into our irrigation equipment database.

Most immediately, however, we'll be removing products that Toro and Irritrol have discontinued. We've already deleted the following items from our database:

Toro product discontinuations:

• Sentinel Controller Series
• Sentinel 2Wire Controller
  • TSD models
• Sentinel Custom Controller Series
• Sentinel Accessories
  • Retro Link Assemblies for Irritrol and RainBird
  • Weather Sources and Wireless Output Board
• TDC Series 2Wire Series
  • 50 station controller
• TIS PRO Series
• TMC 212 Series
• Pressure Regulators Series Drip Emitter
• 500 Series Bubbler
  • Adjustable Flood Stream on 570Z Pop-ups
• Shrub Rotors:
  • Super 800 Series
  • TR50XT Series
• Shrub Sprays
  • Assorted Purple Cap ('E' – Effluent) Nozzles
• Turf Rotors
  • 810G/810GL
  • TG101
  • TR50XT
• Turf Spray
  • Assorted Purple Cap ('E' – Effluent) Nozzles
• Valve-in-Head Rotors
  • DT34/DT54
  • DT35/DT55

• JR Max ControllersPCW Control Series
• CR500 Shrub Rotors
• 450 Series Turf Rotors
• SL Series Turf Spray

Over the past week, we've added Buckner Superior's new 1" Low Profile Quick Coupler Valves to our irrigation equipment library. These QC valves and keys are fully interchangeable with the Signature Control Series. Superior internal components are made from brass and stainless steel with EPDM rubber parts.

Find this product in the Valves section of our Irrigation Manager.

New Netafim details in the following categories can be found in the Detail Explorer, under F/X Detail Library (FX), Irrigation (IR) and Netafim (NETA);

Continuous Acting Air Vents (CAAV)
Controllers (CONT)
Controller Accessories (CONTA)
Drip (DRIP)
Hyrdometer (HYDR)
Control Valve (VALV)

We've recently added the new Watertronics WaterMax 5000 Quickship pump station to our product database. This prefabricated, self-enclosed pump station uses Variable Frequency Drive (VFD) technology to provide performance at varying flow rates.

Find this product in our Irrigation Manager under Auxiliary Equipment/Booster Pumps.