I have edited the design pressure of a piece of equipment (rotor), however, in the critical analysis it won't update. This is also reflected in the mainline sizing. Am I missing a step or do I have to delete and re-add the equipment?
Chris,
You need to re-size the Laterals to reflect any design changes.
Then re-size the Mainline to carry that back to the POC.
Note that the Critical Analysis includes a timestamp, which indicates the time that the mainline was sized, not the time the report was generated.
--J
Chris,
You need to re-size the Laterals to reflect any design changes.
Then re-size the Mainline to carry that back to the POC.
Note that the Critical Analysis includes a timestamp, which indicates the time that the mainline was sized, not the time the report was generated.
--J
When i place heads everything works fine, so it must be some issue within schematic areas
I am going to ask that you send in your files as a tech support ticket so we can take a look at things there. The link below will walk you through how to get us all pertinent files so we can help you out.
Submitting a Tech Support Ticket
Hope to heaer from you till tomorrow when i come back to work .
BR, Nemanja
We released a fix to your issue in the update that went out today. Make sure you are up-to-date, resize your laterals, and you should see the proper values in your schedules.
If you need additional assistance please let us know and we will be happy to help you out!
Regards,
I have one more question regarding pressure.
I have a large scale design with a huge altitude distance - over 50m from pump station to the highest point. Is it possible to somehow make a pressure model to show exact pressure in the mainline (lets say for each 5 meters of elevation different colour of the pipe -for different pressure - 0.5 bar variation ) in order to set the exact inlet pressure value for each pressure reducer? I hope you understand what i mean.Thank you, Nemanya
You can view the pressure needs for any pipe segment with the Edit Equipment tool.
You can also place System Monitors to have this information automatically placed in the drawing.
--J
- Page :
- 1
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.