All of the RB RVAN-14 and RVAN-STRIP, both shrub and turf, are masked. They all plot as solid black blobs. I have the latest version of LandFX, and deleted and reloaded these heads, which updated the latest blocks.
Also, did you guys do something to the .ctb file?
Also, did you guys do something to the .ctb file?
Tom,
This is going to be very similar to the issue you had back in March with your valve callouts.
I assume you are referring to the color 255 that is being used on the LK-IRRG-EQPM-MASK layer? The same theory applies on how to fix this. You need to either:
1- Modify the color in your CTB file to allow for a screening of 0
2- Turn the MASK layer off when plotting
3- (recommended) change the layer color to 133- Since you should have already modified this color to plot white in your CTB file.
You can then, of course, change the source block layer color to 133 so it is this way every time you use that particular head.
This is going to be very similar to the issue you had back in March with your valve callouts.
I assume you are referring to the color 255 that is being used on the LK-IRRG-EQPM-MASK layer? The same theory applies on how to fix this. You need to either:
1- Modify the color in your CTB file to allow for a screening of 0
2- Turn the MASK layer off when plotting
3- (recommended) change the layer color to 133- Since you should have already modified this color to plot white in your CTB file.
You can then, of course, change the source block layer color to 133 so it is this way every time you use that particular head.
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.