This might be better in feature requests, but here's the issue: I accidentally put a whole bunch of 4" turf sprays in shrub areas, which should, of course, be 12" sprays. The replace option via edit/info only allows me to replace those heads with other turf heads--no option to pick shrub heads, or anything else.
Given that the nozzle sizes would remain the same, would it be possible to add switching from turf to shrub (and vice versa) heads as an option for the "replace" function? By early next week? (Ha!)
Other than the time consuming re-doing of the head layout, or managing some sort of "match properties" exercise, is there any quick way of changing all these heads that I don't know about?
Thanks!
Given that the nozzle sizes would remain the same, would it be possible to add switching from turf to shrub (and vice versa) heads as an option for the "replace" function? By early next week? (Ha!)
Other than the time consuming re-doing of the head layout, or managing some sort of "match properties" exercise, is there any quick way of changing all these heads that I don't know about?
Thanks!
Hi Tom,
This stuff happens. We just start clicking away and then .... Oh no!!!! But it's really not that bad.You won't have to redo your head layout. Here's an easy solution:
1. Using the Irrigation Manager add the desired 12" pop-up to your project (if they're not already there).
2. insert the desired head types (half, fulls, etc.) into your drawing at any random location.
3. Using the match properties button (the one with the paint brush on the icon; the plant or irrigation match properties buttons are both equally effective) click the head that you want to switch out to (the 12" pop-up) and then click all of the heads that you want replaced (the 4" pop-ups).
4. Do the same with the other spray patterns and you're done, none for the worst.
Easy as pie. _ hope that this helps you.
Seaweed
(AKA) Steve Cook, Stantec
Don't forget to mix a little fun into it.
This stuff happens. We just start clicking away and then .... Oh no!!!! But it's really not that bad.You won't have to redo your head layout. Here's an easy solution:
1. Using the Irrigation Manager add the desired 12" pop-up to your project (if they're not already there).
2. insert the desired head types (half, fulls, etc.) into your drawing at any random location.
3. Using the match properties button (the one with the paint brush on the icon; the plant or irrigation match properties buttons are both equally effective) click the head that you want to switch out to (the 12" pop-up) and then click all of the heads that you want replaced (the 4" pop-ups).
4. Do the same with the other spray patterns and you're done, none for the worst.
Easy as pie. _ hope that this helps you.
Seaweed
(AKA) Steve Cook, Stantec
Don't forget to mix a little fun into it.
As an even shorter alternative, as long as the nozzles are the same, you could just edit the text description of the head type through the manager. Change the 4" text to 12".
Hi,
How do I replace RWS bubbler Rain Bird RWS-B-C 1400series 1402 with Rain Bird RWS-B-C 1400series 1401 ? I tried with matchprop, tried through edit equip. but it doesnt work? It seems that it could be replaced with another product / brand , its not possible to swap between Components within the same product range? I have around eighty of them (1402) already in the drawing all connected with laterals, wouldnt like to redesign everything...
Thank you
How do I replace RWS bubbler Rain Bird RWS-B-C 1400series 1402 with Rain Bird RWS-B-C 1400series 1401 ? I tried with matchprop, tried through edit equip. but it doesnt work? It seems that it could be replaced with another product / brand , its not possible to swap between Components within the same product range? I have around eighty of them (1402) already in the drawing all connected with laterals, wouldnt like to redesign everything...
Thank you
Solved it with Planting- Clone mimic- Mimic plant tool. First place desired nozzle in the drawing, choose the mimic plant tool and after selectiing desired nozzle as a "source" you can even select multiple nozzles as "destination". It worked in a second !!! Great tool, didnt know it can be used for irrigation, too !
Naturalist,
You beat me to it, nice work! You will actually find that tool on the irrigation tab as well. The link below is the more appropriate Documentation Page that will walk you through how the tool works. But yes, set your source object to match, then your destination, then even window across the entire plan and the system will swap that one piece of equipment (destination type) with another (source type).
https://www.landfx.com/docs/irrigation/adding-placing-heads/1884-match-properties.html
You beat me to it, nice work! You will actually find that tool on the irrigation tab as well. The link below is the more appropriate Documentation Page that will walk you through how the tool works. But yes, set your source object to match, then your destination, then even window across the entire plan and the system will swap that one piece of equipment (destination type) with another (source type).
https://www.landfx.com/docs/irrigation/adding-placing-heads/1884-match-properties.html
There are no comments made for this post yet
Jake,
The only reason I beat you is because I am 9 hours ahead of you
. Thank you Jake for the best support ever! Greetings from Belgrade.
The only reason I beat you is because I am 9 hours ahead of you
. Thank you Jake for the best support ever! Greetings from Belgrade. - Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD®, Revit®, SketchUp®, and Rhino® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.