sales@landfx.com
  +1 805-541-1003
Knowledge Base >
Irrigation

Irrigation

Knowledge Base Subcategory

Errors: Irrigation

Error: The Polyline (or Polygon, Circle, etc.) Selected Contains Arcs or Segments (Placing a Hatch)
Error Accessing Equipment Data in the Project (Selecting or Editing Irrigation Equipment)
That Equipment is Already in the Project (Adding Equipment to a Project)
You Already Have the Maximum Allowed of That Type of That Equipment in the Project (Adding Equipment to a Project)
Unable to Locate Target Hatch Pattern (Placing a Hatch)
INVALID Error (Attempting to Place a Plant or Other Block)
Error: No Plants in Project, Unable to Assign Emitters (Placing Drip Emitters)
AutoCAD Variable Settings Rejected: "CLAYER" ... (Running an Irrigation or Plant Schedule)
Error: Valve ... Has No Precip Rate (Working With Irrigation Equipment or Pipes, or Placing an Irrigation or Watering Schedule)
Point(s) Selected Are Not Within Pipe Segment (Placing a Pipe Hop)
Missing File Error (Placing a Valve Callout)
Error: Valves Called Out – 0 Valves Have Not Been Called Out (Using the Verify Mainline Tool)
Error: Pipe Segment Has Missing Connected Entities (Move Piped Equipment)
Divide by Zero Error (Sizing Lateral Pipes, Taking a Flow Total, or Using Highlight Station or Edit Equipment)
Error Executing Data Request: Data Too Long for Column 'Data_Code' (Sizing the Mainline)
Error: Bad Argument Type: ListP (Running a Schedule)
Pressure Available at the POC Has Been Exceeded / Unable to Size Mainline (Sizing the Mainline)
Error: Zone Text Has Been Edited (Using the Circuiting Tool)
Error: Bad DXF Group: (62) (Working With Irrigation Equipment or Pipes)
You Must First Save the Block into the Plan Graphics Library Using the Save Block Tool (Editing or Viewing Information on a Plant Symbol or Other Block)
Outside Limits Message in Command Line / Cannot Place Blocks / Blocks Not Visible in Model Space
Bad DXF Group (10) (Placing an Object in a Drawing)
Automation Error

Basic Troubleshooting: Irrigation

Adding & Editing Equipment

Error Accessing Equipment Data in the Project (Selecting or Editing Irrigation Equipment)
That Equipment is Already in the Project (Adding Equipment to a Project)
You Already Have the Maximum Allowed of That Type of That Equipment in the Project (Adding Equipment to a Project)
You Must First Save the Block into the Plan Graphics Library Using the Save Block Tool (Editing or Viewing Information on a Plant Symbol or Other Block)
The Pressure Loss is Too High in Your Drip Control Valve or Drip Kit Valve
Buttons Are Grayed Out in Manager Dialog Boxes / Can't Make Edits
Unable to Access Any Web Content (Can't Add Plants, Reference Notes, or Irrigation Equipment)
Importing Plants, Concept Plants, Details, Reference Notes, or Irrigation Equipment Using Cloud Data: AutoCAD Freezes or Crashes
Hatch is Too Dense, or Not Dense Enough (Hatch Scale Issues)
CAD is Crashing When I Try to Access a Manufacturer's Equipment
Oversized Irrigation Head
Can I Create an Irrigation Template or Palette?
Using Project Templates: Not All Irrigation Equipment and Data are Updated
Spray Head Symbol Doesn't Match Symbol Family (Working With Preference Sets)
Changing Nozzle or Size Options in the Irrigation Manager: Selected Option Is Not Applied to Placed Equipment
Specify a Particular Combination of Spray Body and Nozzle Type When Adding or Editing Heads
Entering Irrigation Data Manually
Specifying Equipment That is Not in the Land F/X Database
Work Areas are Not Recognizing/Calculating Hatches Correctly
Creating a Custom Flow (GPM) for a Specific Valve
Equipment You've Added to a Project is Not Operating Correctly
Customize the Model Name for Equipment
You Selected a Piece of Irrigation Equipment but Don't See Options for Selecting a Symbol
Adding Custom Drip Emitter: No Symbols Available
Can I Account for Pressure Loss in Equipment Added as a Custom Element?
Replacing Plant Symbols with Irrigation Symbols

Placing Equipment

Symbols, Blocks & Hatches

Piping

Pipe Sizing

Divide by Zero Error (Sizing Lateral Pipes, Taking a Flow Total, or Using Highlight Station or Edit Equipment)
Error Executing Data Request: Data Too Long for Column 'Data_Code' (Sizing the Mainline)
Pressure Available at the POC Has Been Exceeded / Unable to Size Mainline (Sizing the Mainline)
Irrigation F/X Says I Need More Pressure at the Source or POC Than I Think I Need
The Pressure and/or Flow are Too Low in Your Irrigation System after Sizing the Mainline: Troubleshooting
Irrigation Equipment or Components Connecting Automatically
Critical Analysis is Wrong
Pressure Loss for the Master Valve Is Not Appearing in the Critical Analysis
Unable to Size System (Unsizeable System)
I Can't Size the Mainline! (Mainline Sizing Troubleshooting)
Sizing a Looped Mainline
Sizing Mainline: Drawing Freezes During "Recursing Pipe"
Pressure Rate of 999 PSI When Sizing Mainline
Pipe Data Defaults Not Saving or Sticking
Repair Your Pipe Data (Pipes Sizing Backward, or With a Size You Haven't Selected)
Size the Mainline Manually Using Caps
If I Attach a Point Emitter to the Drip Line for Additional Watering, Will the Additional Flow in the Lateral Pipe Sizing Be Included?
Lateral Pipe Categories/Classes Are Not Sizing to Your Needs, or You Want to Size Your Laterals According to Zone Type
Can I Use a 1 1/4-Inch Mainline With a 1-Inch Solenoid Valve and an Output to a 2-Inch Lateral Line in a 20.9 GPM Zone?
Run Multiple Valves at a Time
Sizing Lateral Pipes: New Spray Coverage Regions Appearing on Xref Layer Each Time Your Resize

Irrigation Schedules

AutoCAD Variable Settings Rejected: "CLAYER" ... (Running an Irrigation or Plant Schedule)
Error: Valve ... Has No Precip Rate (Working With Irrigation Equipment or Pipes, or Placing an Irrigation or Watering Schedule)
Error: Bad Argument Type: ListP (Running a Schedule)
Identical Zones Have Different Precipitation Rates
Wrong Irrigation Symbols Coming In – Drawing or Schedule
Text Appearing Too Large or Small / Scaled Incorrectly (Including Callouts and Schedules)
Unable to Run a Schedule for an Entire Drawing that Contains Work Areas
You Want Your Schedule Text in Uppercase (All Capital Letters)
Create a Background Fill or Mask for Schedules
Schedule for Work Area Does Not Appear or Can't Be Placed
Boxes Displayed Instead of Text
Table Format Schedules With No Lines (Hybrid of Drawing and Table Styles)
Rearrange Columns in a Schedule (Plant Schedule, Irrigation Schedule, Reference Notes Schedule, Etc.)
Change the Text Size in Schedule Columns or Rows (Table Format)
Edit a Work Area Name to Change a Schedule Title
Your Screen Flashes Several Times When You Place a Schedule in Paper Space
Valve Schedule: Excessive Precip Rate in One Station
Wire Lengths Are Blank in the Valve Schedule
Incorrect Precipitation Rates Appearing in the Watering or Runtime Schedule
Multiple Irrigation Schedules
How Can I Create an Estimate or Add Pricing to Materials for Irrigation?
Mainline or Lateral Pipe Symbol Has Incorrect Linetype in Irrigation Schedule (Solid, Dashed, etc.)
Irrigation Symbols Showing Off Center in Schedule
Unknown Irrigation Equipment Is Appearing on the Schedule, and I'm Not Sure Why/Where It Is
Irrigation Schedule Does Not Show All My Equipment
Irrigation Schedule Shows a Duplicate Symbol and Quantity for Certain Equipment
The Irrigation Schedule is Too Wide – Text Wrap Issues?
Irrigation Schedule Is Not Grouping Equipment / Is Listing the Same Equipment in Separate Lines
Multiple Points of Connection (POCs) in Plan: List Only One POC in Irrigation Schedule
Incorrect Symbol in the Irrigation Schedule
Multiple Pipe Instances in Irrigation Schedule
Incorrect Text Style in Schedule Text or Title



Contact

  • Land F/X
  • 3165 Broad St. #114
    San Luis Obispo, CA 93401
  • +1 805-541-1003

Our software tailors AutoCAD to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.

Log in to landfx.com:

Username:

Password:

Register
Forgot login